Operation
52
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
7.3.5 Refilling Engine Oil
IMPORTANT!
Component damage caused by
over filling!
Engine damage can occur if engine
oil is filled to above the max. mark
on the oil dipstick.
For this reason:
S Do not fill engine oil above the
max. mark on the oil dipstick
MIN
MAX
1. Remove cap (1).
2. Slowly fill engine oil into the filler neck.
The oil level should be between both marks on the
dipstick.
3. Reinstall cap (1).
4. Check engine oil level.
1
To Next Page
Loading...
Need help?
General
