Technical Data
69
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Engine lubrication Force feed lubrication
Lubrication oil pressure during ope
ration (depends on engine speed,
oil temperature and engine load)
must be monitored via an oil pressure monitor or a display device
Oil filter Single-use main flow filter (easy-change filter)
Oil capacity in oil sump (litres) min. max.
half deep 17 l 25 l
Oil change quantity (with filter) 26 l
Engine cooling system Liquid cooling
Coolant temperature
Inlet temperature min. 80_C
Outlet temperature max. 88°C
Coolant filling capacity in engine approx. --
Electrical equipment
Starter 24 V; 4 KW
Test values
Natural gas operation Biogas operation
Lambda (oxygen) 1.62 1.42
To Next Page
Loading...
Need help?
General
