8 Part Number: 000016538 Rev 03 04/23
Installation Operation Maintenance Section 1
Before Calling For Service Checklist
If a problem arises during operation of your ice storage bin, follow the checklist below before calling service.
Routine adjustments and maintenance procedures are not covered by the warranty.
Problem Possible Cause To Correct
Water in bottom of bin
Drain incorrectly installed
Drain must be open site with an air gap and
correct pitch
Ice machine and bin do not have separate
drains
Correct drain installation
Water-cooled condenser and bin do not have
separate drains
Correct drain installation
Drain obstructed Clear drain
Ice in bin does not drop
Baffle is incorrectly positioned Readjust baffle
Ice forming ice bridge
Breakup ice bridge with paddle.
Verify water is not leaking from ice machine
into bin.
Ice falls on floor when bin door is opened Baffle is incorrectly positioned Readjust baffle and/or spring loaded hinges.
Ice in bin is congealed and will not break
up
Bin is not emptied on a regular basis
Empty bin to remove congealed ice regularly.
Verify water is not leaking from the ice machine
into the bin.
If the issue is not resolved, install a thermostat
to lower level of ice in bin to meet current
usage.
Warranty
For warranty information visit:
www.manitowocice.com/Service/Warranty
• Warranty Coverage Information
• Warranty Registration
• Warranty Verification
Warranty coverage begins the day the ice machine is
installed.
WARRANTY REGISTRATION
Completing the warranty registration process is a quick and
easy way to protect your investment.
Scan the QR code with your smart device or enter the link in
a web browser to complete your warranty registration.
WWW.MANITOWOCICE.COM/SERVICE/
WARRANTY#WARRANTY-REGISTRATION
Registering your product insures warranty coverage and
streamlines the process if any warranty work is required.
To Next Page
Loading...
Need help?
General