Part Number 040005626 5/17 23
Ice Machine Heat of Rejection
Leveling the Ice Machine
1. The leveling legs must be screwed into the bottom
of the bin as far as possible.
2. Move the bin into its final position.
3. Use a level on top of the bin. Adjust each foot as
necessary and level from front to back and side to
side.
Series
Ice Machine
Heat of Rejection
1
1 B.T.U./Hour
Air
Conditioning
2
2 Because the heat of rejection varies during the ice making
cycle, the figure shown is an average.
Ice machines, like other refrigeration equipment, reject
heat through the condenser. It is helpful to know the
amount of heat rejected by the ice machine when
sizing air conditioning equipment where self-contained
air-cooled ice machines are installed.
Peak
M0420 5400 6300
M0500 5300 6100
M0700 9000 13900
M1000 16250 18600
M1400 28300 34300
The legs must be screwed in tightly to prevent
them from bending.
To Next Page
Loading...
Need help?
General