EasyManuals Logo
Home>Manitowoc>Construction Equipment>MLC100-1

Manitowoc MLC100-1 Guide

Manitowoc MLC100-1
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Manitowoc F2314-15
07-20-21
MLC80A-1/MLC90A-1/MLC100A-1/MLC100-1 LUBRICATION GUIDE
NOTE 1 Two batteries are located behind the removable
cover.
NOTE 2 Travel in either direction so the gearbox fill and
drain plugs form a visual line vertical to the
ground.
NOTE 3 The gearbox is equipped with a quick-drain valve
which requires use of the quick-drain drainer
assembly shown in Figure 9
. The quick-drain
drainer assembly is stored in the parts box
supplied with the crane.
As an alternative to filling the swing gearbox
through the fill plug, you can fill the gearbox using
the Power Fill Procedure outlined in Section 6 of
the Service Manual supplied with the crane.
NOTE 4 Rotate the drum so the sight gauge and the plugs
are accessible through the holes in the drum
flange. Park drum and STOP engine so drum
cannot be operated while servicing.
NOTE 5 Attach an owner furnished hose to the nipple on
the drain valve.
Item Description Required Service
Quarterly or Every 500 Hours of Engine Operation or (whichever comes first)
Q1 Batteries (qty 2) (see NOTE 1
) Clean and inspect. Check Electrolyte level.
Semi-Annually or Every 200 Hours of Function Operation or
Every 1000 Hours of Engine Operation (whichever comes first)
S1 Crawler Gearbox (qty 2) (see NOTE 2
Drain and refill both with specified gear oil.
S2 Swing Gearbox (see NOTE 3
) Drain and refill with specified gear oil.
Semi-Annually or Every 500 Engine Hours of Operation or (whichever comes first)
S3 Engine Service per engine manufacturer’s manual.
Semi-Annually or Every 1000 Engine Hours of Operation or (whichever comes first)
S4 Hydraulic Filter (qty 2) Replace
S5 Hydraulic Tank Drain Plug Drain and refill with specified hydraulic oil.
Yearly or Every 400 Hours of Function Operation or Every 2000 Hours of Engine Operation (whichever comes first)
Y1 Drum 3 Drain Plug (see NOTE 4
) Drain and refill with specified gear oil.
Y2 Drum 1, 2, 4 Drain Plug (see NOTE 3
) Drain and refill each with specified gear oil.
Biennially or Every 2000 Hours of Engine Operation (whichever comes first)
B1 Radiator Drain Valve (see NOTE 5
) Drain and refill with specified antifreeze.
Item Description
1 Quick-Drain Drainer
2 Hose Clamp
3 Hose: 3/4 in (19 mm) Inside Diameter by 10 ft (3,0 m) Long
123
FIGURE 9
FOR REFERENCE
ONLY

Table of Contents

Other manuals for Manitowoc MLC100-1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc MLC100-1 and is the answer not in the manual?

Manitowoc MLC100-1 Specifications

General IconGeneral
BrandManitowoc
ModelMLC100-1
CategoryConstruction Equipment
LanguageEnglish

Related product manuals