32 Part Number STH042 7/15
TOUCH PAD OPERATION
Pressing and holding the clean button for 3 seconds
starts the clean cycle. The Clean & On/Off lights energize
indicating the clean cycle has started and ice making will
automatically start when the Clean cycle is complete.
• Setting the ice machine to stop after the clean
cycle: Press the On/Off button. The On/Off light will
de-energize indicating the ice machine will stop after
the clean cycle.
• Pausing the cleaning cycle: Press the Clean button.
The clean light will flash indicating the clean cycle has
paused. Pressing the Clean button again will restart
the clean cycle.
Step 1 Press the On/Off button after ice falls from the
evaporator at the end of a Harvest cycle. Or, press the On/
Off button and allow the ice to melt off the evaporator.
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
Warning
Wear rubber gloves and safety goggles (and/or
face shield) when handling Ice Machine Cleaner or
Sanitizer.
To Next Page
Loading...
Need help?
General