2-4
Installation Instructions Section 2
Leveling the Ice Machine
1. Screw the leveling legs onto the bottom of the ice
machine.
2. Screw the foot of each leg in as far as possible.
CAUTION
The legs must be screwed in tightly to prevent them
from bending.
3. Move the ice machine into its final position.
4. Level the ice machine to assure that the siphon
system functions correctly. Use a level on top of
the ice machine. Turn each foot as necessary to
level the ice machine from front to back and side
to side.
NOTE: An optional 2 ½" caster assembly is available
for use in place of the legs on the Q130, Q210 and
Q270. Installation instructions are supplied with the
casters.
Checking Ice Machine Level
SV1606
THREAD
LEVELING LEG
INTO BASE OF
CABINET
THREAD “FOOT”
IN AS FAR AS
POSSIBLE
To Next Page
Loading...
Need help?
General
