Manitowoc Q130 series User Manual

2-7
Section 2 Installation Instructions
WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONS
CAUTION
Plumbing must conform to state and local codes.
Location
Water
Temperature
Water
Pressure
Ice Machine
Fitting
Tubing Size Up to Ice
Machine Fitting
Ice Making
Water Inlet
33°F (0.6°C) Min.
90°F (32.2°C) Max.
20 psi (137.9 kPA) Min.
80 psi (551.5 kPA) Max.
3/8” Female Pipe
Thread
3/8” (9.5 mm) minimum
inside diameter
Condenser
Water Inlet
33°F (0.6°C) Min.
90°F (32.2°C) Max.
20 psi (137.9 kPA) Min.
150 psi (1034.2 kPA) Max.
1/2” Female Pipe
Thread
1/2” (12.7 mm)
minimum inside
diameter
Condenser
Water Drain
--- ---
1/2” Female Pipe
Thread
1/2” (12.7 mm)
minimum inside
diameter
Bin Drain
--- ---
1/2” Female Pipe
Thread
1/2” (12.7 mm)
minimum inside
diameter
Typical Water Supply Drain Installation
BIN DRAIN
CONDENSER WATER
DRAIN TUBING
1/2″ MIN. I.D. (1.27CM)
ICE MAKING WATER
INLET TUBING
3/8″ MIN. I.D. (.95CM)
CONDENSER WATER
INLET TUBING
1/2″ MIN. I.D. (1.27CM)
WATER SHUTOFF
VALVE
VENT TUBING 8”
(20CM) LONG
SV1691

Manitowoc Q130 series Specifications

General

Brand	Manitowoc
Model	Q130 series
Category	Ice Maker
Language	English