Section 2 Installation Instructions
Part Number 000001130 12/08 2-3
Leveling the Ice Machine
1. Screw the leveling legs onto the bottom of the ice
machine.
2. Screw the foot of each leg in as far as possible.
3. Move the ice machine into its final position.
4. Level the ice machine to assure that the siphon
system functions correctly. Use a level on top of the
ice machine. Turn each foot as necessary to level
the ice machine from front to back and side to side.
NOTE: An optional 2 ½" caster assembly is available for
use in place of the legs on the Q130, Q210 and Q270.
Installation instructions are supplied with the casters.
Checking Ice Machine Level
The legs must be screwed in tightly to prevent
them from bending.
THREAD LEVELING
LEG INTO BASE OF
CABINET
To Next Page
Loading...
Need help?
General
