Part Number 000007661 6/13 75
RFS0300/RNS0308 Troubleshooting
SELF-CONTAINED AIR-COOLED
When the toggle switch is placed in the “ON” position
the following controls must be in the closed position
before the ice machine will start:
A. Bin Thermostat
B. Ice Chute Safety Switch
C. Low Water Level Switch
D. High Pressure Cut-out Switch
E. Low Pressure Cut-Out Switch
Placing the toggle switch in the ON position starts the
gear motor and a 10 minute compressor time delay.
The compressor starts and the float valve controls the
water inlet valve and water level. The freeze cycle
ends when ice contacts the bin thermostat. The ice
machine remains off until ice no longer contacts the
bin thermostat.
To Next Page
Loading...
Need help?
General