Section 7 Refrigeration System
Part Number 80-1480-3 7-57
FILTER-DRIERS
The filter-driers used on Manitowoc ice machines are
manufactured to Manitowoc specifications.
The difference between Manitowoc driers and off-the-
shelf driers is in filtration. Manitowoc driers have dirt-
retaining filtration, with fiberglass filters on both the inlet
and outlet ends. This is very important because ice
machines have a back-flushing action which takes place
during every harvest cycle.
These filter-driers have a very high moisture removal
capability and a good acid removal capability.
The size of the filter-drier is important. The refrigerant
charge is critical. Using an improperly sized filter-drier
will cause the ice machine to be improperly charged with
refrigerant.
Listed below are the recommended O.E.M. field
replacement driers:
Important
Driers are covered as a warranty part. The drier
must be replaced any time the system is opened for
repairs.
Model
Drier
Size
End
Connection
Size
Part
Number
S300A S300W
S320A S320W
S420A S420W
S450A S450W
S500A S500W
S600A S600W
S850A S850W
S1000A S1000W
UK-032S 1/4" 89-3025-9
S1200A S1200W UK-052S 1/4" 89-3024-9
S500N S600N
S850N S1000N
S1400A S1400W
S1400N
S1600A S1600W
S1600N
S1800A S1800W
S1800N
UK-053S 3/8" 89-3027-9
Suction Filter
UK-165S 5/8" 89-3028-3
Suction Filter used when cleaning up severely contaminated systems
To Next Page
Loading...
Need help?
General