EasyManuals Logo
Home>Manitowoc>Ice Maker>SN20

Manitowoc SN20 User Manual

Manitowoc SN20
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Section 4 Maintenance
Part Number 000005544 12/09 4-7
Component Disassembly For Cleaning/Sanitizing
The ice machine must be disassembled cleaned and
sanitized every six months.
1. Turn off water supply to ice machine.
2. Place toggle switch in the clean position for 30
seconds to drain water from reservoir, then move
toggle switch to Off position.
3. Run dispenser to transfer all ice from the bin to a
container.
4. Disconnect electrical power to the ice machine.
5. Remove top cover.
A. Remove two thumbscrews.
B. Lift up on top cover to remove.
6. Remove front cover.
A. Lift up on front cover.
B. Pull forward to disengage keyhole slots.
7. Remove ice chute cover
A. Turn the two thumbscrews 1/4 turn
B. Lift to remove cover.
!
Caution
Do not mix Cleaner and Sanitizer solutions together.
It is a violation of Federal law to use these solutions
in a manner inconsistent with their labeling.
!
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or
Sanitizer.
!
Warning
Disconnect electric power to the ice machine at the
electric switch box before proceeding.
Remove
Screws
Loosen Thumbscrews

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc SN20 and is the answer not in the manual?

Manitowoc SN20 Specifications

General IconGeneral
BrandManitowoc
ModelSN20
CategoryIce Maker
LanguageEnglish

Related product manuals