EasyManuals Logo
Home>Manitowoc>Ice Maker>UDE080A

Manitowoc UDE080A User Manual

Manitowoc UDE080A
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Part Number 000014797 Rev02 05/18 39
PREVENTATIVE MAINTENANCE CLEANING
This cleaning procedure can be performed between the bi-
annual cleaning and sanitizing cycles. This procedure does
not require removing the ice from the bin.
Step 1 Press the On/Off button after ice falls from the
evaporator at the end of a Harvest cycle. Or, press the On/
Off button and allow the ice to melt off the evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or Sanitizer.
Step 2 To start a cleaning cycle, press the Clean button.
Water will flow through the water dump valve and down
the drain. Wait until the water trough refills, then add the
proper amount of ice machine cleaner to the water trough.
Model Amount of Cleaner
U0140/UF0140 2 ounce (60 ml)
U0190/UF0190 5 ounces (150 ml)
U240/UF0240 5 ounces (150 ml)
U310/UF0310 5 ounces (150 ml)
Wait until the clean cycle is complete (approximately 22
minutes) then press the On/Off button.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc UDE080A and is the answer not in the manual?

Manitowoc UDE080A Specifications

General IconGeneral
BrandManitowoc
ModelUDE080A
CategoryIce Maker
LanguageEnglish

Related product manuals