Manitowoc UG040A User Manual

2-6 Part Number: 040003628 Rev. 01 01/14/18
Installation Instructions Section 2
Installation Checklist

Is the ice machine level?

Have all of the internal packing been
removed?

Have all of the electrical and water
connections been made?

Has the supply voltage been tested and
checked against the rating on the nameplate?

Are all components installed?

Has the ice machine been installed where
ambient temperatures will remain in the range
of 10 - 43°C (50 - 110°F)?

Has the ice machine been installed where the
incoming water temperature will remain in the
range of 10 - 32.2°C (50 - 90°F)?

Is there a separate drain line for the water-
cooled condenser?

Are all electrical leads free from contact with
refrigeration lines and moving equipment?

Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?

Has the owner/operator completed the
warranty registration card?

Has the ice machine and bin been sanitized?

Has this manual been given to the owner/
operator?

Is the ON - OFF - WASH switch set to the ON
position?
Before Starting the Ice Machine
All ice machines are factory-operated and adjusted
before shipment. Normally, new installations do not
require any adjustment.
To ensure proper operation, follow the Operational
Checks in Section 3 of this manual. Starting the ice
machine and completing the Operational Checks are
the responsibilities of the owner/operator.
Adjustments and maintenance procedures outlined
in this manual are not covered by the warranty.
Warning
PERSONAL INJURY POTENTIAL
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified
from that of original manufactured specifications.

Manitowoc UG040A Specifications

General

Brand	Manitowoc
Model	UG040A
Category	Ice Maker
Language	English