Marshall Amplification MONITOR II A.N.C. User Manual

009
0 10
THE M-BUTTON
The M-button can be set to switch between three dierent equaliser presets or
alternatively, your phones voice assistant or the Google Assistant.
Go to the Marshall Bluetooth app and configure the M-button from the
M-Button settings menu
Note: Voice assistant may not be available in your country and requires a
separate account/agreement between you and the third party service.
THE ANC MODE BUTTON
Monitor II A.N.C. utilise Active Noise Cancelling (ANC) technology that
continuously pinpoints and measures ambient noise to control how much of
the outside world you hear.
There are two ANC modes.
• Active noise cancelling - Block out the noise and focus on what is
playing.
• Monitoring mode - Let the outside world in to engage in a conversation
or listen to an announcement.
Use the ANC button to quickly change between modes.
001. Short press toggles Active noise cancelling and Monitoring mode
002. Push and hold for 2 seconds to turn ANC o or on
The level of noise cancelling and monitoring can be adjusted in the Marshall
Bluetooth app.
THE 3.5 MM INPUT
To use the Monitor II A.N.C. with a wired device, simply use the 3.5 mm cable
included. Once connected, Bluetooth will disconnect for audio streaming. You
can still use ANC, as long as your headphones are turned on.
When the 3.5 mm cable is disconnected, the headphones will try to reconnect
with the last connected Bluetooth device.

Marshall Amplification MONITOR II A.N.C. Specifications

General

Brand	Marshall Amplification
Model	MONITOR II A.N.C.
Category	Headphone
Language	English