Marshall Amplification MONITOR II A.N.C. User Manual

007
008
THE CONTROL KNOB
Use the control knob on the right ear cap to control audio, start Bluetooth
®
pairing mode and turn the headphones on or o.
FUNCTION ACTION
POWER ON/OFF Push and hold for 2 seconds
PLAY/PAUSE Single-click
SKIP FORWARD Push to the right
SKIP BACK Push to the left
FAST FORWARD Push to the right and hold
REWIND Push to the left and hold
TURN UP THE VOLUME Push upwards
TURN DOWN THE VOLUME Push downwards
HANDLE CALLS Single-click to answer or end call
Double-click to reject an incoming call
THE LED INDICATOR
The LED indicator is located on the left ear cap and shows the headphones
status:
LED STATUS HEADPHONES STATUS
RED-ORANGE-YELLOW-GREEN Charging (0-100% battery level)
WHITE LIGHT BLINKING EVERY 5TH SECOND Powered on, connected to a Bluetooth
®
device with
audio paused
WHITE BLINKING Searching for previously paired devices
BLUE BLINKING Bluetooth pairing mode
OFF Power o or playing via Bluetooth
CHARGING YOUR HEADPHONES
When the battery charge is low, an alert will sound.
Plug your headphones into a USB power source via the USB-C cable to charge
the battery. A full battery recharge takes approximately 2 hours, and 15
minutes of charging can get you up to 5 hours of wireless playtime.

Marshall Amplification MONITOR II A.N.C. Specifications

General

Brand	Marshall Amplification
Model	MONITOR II A.N.C.
Category	Headphone
Language	English