Marshall Amplification STANMORE III User Manual

004
STANMORE III - FULL ONLINE MANUAL
BACK TO INDEX
DEVICE LAYOUT ENGLISH
1
3.5 MM INPUT
Plug in an analogue audio device with a 3.5 mm stereo jack.
2
SOURCE SELECTION
Push the source button to toggle between Bluetooth
®
, AUX, and RCA
audio sources. A lit indicator shows which source is selected. This can
also be selected from the Marshall Bluetooth app.
Caution: Make sure that the volume is set to low on both the speaker
and the audio device before using the speaker.
3
AUDIO CONTROLS
Stanmore III includes three controls for adjusting the audio.
I. Volume control
II. Bass control
III. Treble control
4
MEDIA CONTROL
Control the audio directly from the top panel when playing via Bluetooth.
I. Push to play or pause
II. Push right to skip forward
III. Push left to skip back
IV. Hold left or right to rewind or fast forward
Playback can also be controlled from the Marshall Bluetooth app.
5
POWER SWITCH
Use the power switch to turn the speaker on or o.

Marshall Amplification STANMORE III Specifications

General

Brand	Marshall Amplification
Model	STANMORE III
Category	Speakers
Language	English