0. Introduction - Specifications
24 Workshop Service Manual for CENTORA 7280-7282 Combine Range - EN_D3111800M2
67. Explain that the tension of all nuts and bolts should be
checked every day, including wheel bolts, particularly
as time goes by and the components settle.
68. Explain the importance of correct tyre pressure.
69. Explain the operation and calibration of optional equip-
ment fitted on the machine, e.g.: Straw chopper, chaff
spreader, Constant Flow, Auto Level table, Auto Level
machine, etc.
70. Discuss with the customer which crops are to be har-
vested and check that the necessary equipment is
present. Demonstrate and explain how to adjust the
combine for the particular crop.
71. Explain cleaning and off-season storage.
To conclude instruction the dealer should:
72. Enter all combine serial numbers in the combine iden-
tification section of the Combine Service Record
Book.
73. Familiarise the owner with the service and warranty
terms, and the service inspections required during the
warranty period.
74. Complete the Installation and Delivery Coupon, and
ask for the owner’s signature.
To Next Page
Loading...
Need help?
General