
Do you have a question about the Master Forge GBC22491L and is the answer not in the manual?
| Brand | Master Forge |
|---|---|
| Model | GBC22491L |
| Category | Grill |
| Language | English |
Install front and rear legs, leg seats, and cart frame supports to build the base structure.
Attach wheels, axle, and gas tank retainer wire to the assembled cart frame.
Secure the grill body assembly and attach the left and right side shelves to the frame.
Connect side burner, attach heat plates, cooking grids, and control knobs to the grill.
Place the LP gas tank upright into the cart frame notches for connection.
Secure the LP gas tank by sliding the retainer wire over its shoulder.
Ensure no debris is present and connect the regulator/hose assembly to the tank.
Ensure the tank valve is closed, disconnect regulator, and store tank safely.
Perform leak checks on burner connections and tank/gas line before operating.
Details on lighting, preheating, and general operation of the main burners.
Instructions for safely lighting the main burners using the igniter or a match.
Pre-use checks including cleaning the grill area and checking burner airflow.
Instructions for wiping down and cleaning the exterior surfaces of the grill.
Procedure for cleaning main burners, including removing parts and checking orifices.












Loading...