PREPARATION
Prior to the assembly of the product, make sure all parts are present. Compare all
parts with the package contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: Less than 5 minutes
ASSEMBLY INSTRUCTIONS
1. Unfold the legs on the body (A).
2. Check the ignition electrode.
Make sure an electric spark can be generated
at the clearance between the ignition
electrode tip and burner port when pressing
the igniter button.
If there is no electric spark generated at the
clearance, simply adjust the ignition electrode
tip to maintain a 1/8 in. to 3/16 in. clearance
between the ignition electrode tip and burner
port. The tip of the electrode must be directly
over a burner port.
To Next Page
Loading...
Need help?
General
