© 2018, Pinnacle Climate Technologies, Inc. 4 High Capacity Barrel Fan User’s Manual
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING
OR WHILE CONNECTED TO A POWER SOURCE
Figure 2: Capacitor Assembly
Figure 3: Fan Shaft Assembly
Bearing E-clips
Bearings
1. Inspect your fan before each use. Check all wires and
extension cords, following the procedure outlined on
Page 2 (Safety Information).
2. After use, always be sure the fan’s Power Switch is in
the OFF position before unplugging. Use the cord wrap
to keep cord off the ground when transporting fan.
Maintenance and Storage
Motor
Black: High Speed
Green: Low Speed
White
Capacitor
White
Thermal Protector
120V ~ 60Hz
Wiring Diagram
To Next Page
Loading...
Need help?
General
