MasterCraft 058-813-2 User Manual

OPERATING INSTRUCTIONS
15
AIR-POWERED STAPLER 058-8132-2
Loading staples
1. Disconnect the tool (1) from the air
hose (2)
(fig A) .
2. Take hold of the stapler firmly with one
hand and use the other hand to press
the latch (1) on the magazine (2) and
slide it back. Insert a strip of staples into
the magazine. Ensure the points of the
staples are facing down
(fig B) .
(see nail type icon on page 14)
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the compressed air source before loading staples.
• Do not point the tool towards the operator or other people while changing
staples.
• Do not hold the tool with the trigger pressed while changing the staples.
Failure to comply will lead to serious injury or loss of life.
MC-8132-03
fig A
2
1
2
MC-8132-04
fig B
1
2

MasterCraft 058-813-2 Specifications

General

Brand	MasterCraft
Model	058-813-2
Category	Power Tool
Language	English