EasyManuals Logo
Home>Matrix>Network Hardware>Asset Management

Matrix Asset Management User Manual

Matrix Asset Management
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
SECTION C: REMOTE ACCESS POINT MANUAL
RAP SPECIFICATIONS
The RAP is set up to be an Internet appliance for the movement of data from the Matrix Asset Management proprietary BodyLAN RF network to
the Internet via a standard RJ-45 ethernet connection. This is the sole purpose of this appliance. The RAP is running the embedded Windows
XP Operating System and will boot-up the password-protected shell that has been installed. The embedded Windows platform is stripped
down, only providing the services needed to operate the Matrix Asset Management application (AHclient.exe).
Dimensions 4” x 2” x 6”
Power 2 Amps at 110 volts
BodyLAN RF Protocol Radio Frequency ISM spectrum (2.429 GHz)
Max RF Power Level 1mwatts/cm2
Channel Spacing 1Mhz
Frequency deviation +/- 156 Hz
GFSK modulation Yes
db Receive sensitivity (-93)
Data Rate Up to 1 Mbps (250 Kbps typical)
Range Up to 100 meters
Low sensitivity to interference Yes
Operating System Embedded Windows XP
Internet Connection IEEE 802.3 RJ-45 100 mb ethernet
Power and Ethernet connectivity indicators Yes
Power Switch Yes (disabled)
MTBF 100,000 hrs
Temperature Range 0-125 degrees F
MATRIX ASSET MANAGEMENT TECHNICAL SUPPORT SERVICES
If you have further questions, please email: service@johnsonfit.com or contact Customer Service at 1-866-693-4863
SPECIFICATIONS:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix Asset Management and is the answer not in the manual?

Matrix Asset Management Specifications

General IconGeneral
BrandMatrix
ModelAsset Management
CategoryNetwork Hardware
LanguageEnglish