EasyManuals Logo
Home>Matrix>Fitness Equipment>ENDURANCE CLIMBMILL

Matrix ENDURANCE CLIMBMILL User Manual

Matrix ENDURANCE CLIMBMILL
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
ENGLISH
MAINTENANCE
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Unplug the unit. Clean entire frame and shrouds using water and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
DAILY
ENDURANCE: Unplug the ClimbMill and remove the access panel. Clean chain of old grease and re-apply a
lithium-based grease to each chain link.
MONTHLY
Check step motion and stability to ensure the ClimbMill does not rock or wobble. QUARTERLY
Check all connecting joint areas for tightness of bolt assemblies. QUARTERLY
Ensure that there is little, or no free play at all joint assemblies once bolts have been tightened. Installation of
washer kits may be required if free play does not come out from tightening bolts.
QUARTERLY
Unplug the ClimbMill and remove the access panel. Clean sprockets of old grease and re-apply a lithium-based
grease to sprocket teeth.
QUARTERLY
Unplug the ClimbMill and clean the AUTO STOP SENSORS (located under the bottom step) and IR sensor
windows on Control Zone with a cotton swab, water and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
QUARTERLY
PRODUCT SPECIFICATIONS
ENDURANCE PERFORMANCE
CONSOLE TOUCH XL TOUCH PREMIUM LED
LED / GROUP
TRAINING LED
TOUCH XL TOUCH PREMIUM LED
LED / GROUP
TRAINING LED
Max User Weight
182 kg /
400 lbs
182 kg /
400 lbs
Product Weight
180.3 kg /
397.5 lbs
177.4 kg /
391.1 lbs
175.6 kg /
387.1 lbs
174.9 kg /
385.6 lbs
191.7 kg /
422.6 lbs
188.8 kg /
416.2 lbs
187 kg /
412.3 lbs
186.3 kg /
410.7 lbs
Shipping Weight
211.2 kg /
465.6 lbs
202.6 kg /
455.5 lbs
204.8 kg /
451.5 lbs
204.1 kg /
450 lbs
214.4 kg /
472.7 lbs
209.8 kg /
462.5 lbs
208 kg /
458.6 lbs
207.3 kg /
457 lbs
Overall Dimensions
(L x W x H)*
161.2 x 102.4 x 218 cm /
63.5” x 40.3” x 85.8”
182.5 x 102.4 x 219.1 cm /
71.9” x 40.3” x 86.3”
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX equipment.
Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix ENDURANCE CLIMBMILL and is the answer not in the manual?

Matrix ENDURANCE CLIMBMILL Specifications

General IconGeneral
BrandMatrix
ModelENDURANCE CLIMBMILL
CategoryFitness Equipment
LanguageEnglish

Related product manuals