CHAPTER 4: mX-t3X overlay Description / programing / engineering moDe
4
4.1 MX-T3x CONSOLE DESCRIPTION
The MATRIX treadmill is inspected before it is packaged. It is shipped in
four pieces: the base, the upright console supports, the handlebar and
the console. Carefully unpack the unit and dispose of the box material.
CAUTION This unit weights 350 lbs / 159 kg. To avoid injury to the user
and the unit, be sure to have proper assistance to remove and move the
unit.
PROGRAM KEYS: Simple program view and selection buttons.
Six programs to choose from.
qUICK START/START: One touch Start and Quick Start.
SELECT: To confirm each program setting
.
STOP: Press the STOP key once to pause the program for 2 minutes. During
the 2 minute pause, press the QUICK START key to continue running
the program, or else the machine will reset automatically. Also, you
can press and hold the STOP key to reset the treadmill.
UP/DOWN ELEvATION: Easy information and elevation selection.
UP/DOWN SPEED: Easy information and speed selection.
EMERGENCY STOP: Press the EMERGENCY STOP key once to stop and
immobilize all functions. To return to normal operation
mode, press the key once again.
4.2 MANUAL OPERATION
MATRIX design makes using the programs as easy as one touch of a button.
qUICK START
Press the “QUICK START” key and the LED will show “3”, “2”, “1”, “GO!”.
The treadmill will start running from the lowest incline and 0.5 mph / 0.8 kph,
with the default time counting down from 20 minutes.
MANUAL MODE allows you to enter desired time, level and weight.
1) Choose the “
MANUAL” program using the program qUICK-KEYS, then
press SELECT.
2) Choose the
TIME using SPEED -/+, then press SELECT.
3) Choose WEIGHT using SPEED -/+, then press SELECT.
4) Press START.
4.3 OPERATING LEvEL BASED PROGRAMS
Your MATRIX Treadmill offers versatile programs to keep the user motivated.
The following instructions will guide you through simple steps to select
INTERVALS, ROLLING and 5K RUN programs.
INTERvALS & ROLLING
1) Choose the program using the program qUICK-KEYS, then press
SELECT.
2) Choose the LEvEL using SPEED -/+, then press SELECT.
3) Choose the TIME using SPEED -/+, then press SELECT.
4) Choose WEIGHT using SPEED -/+, then press SELECT.
5) Press START.
5K RUN
1) Choose the “
5K” program using the program qUICK-KEYS, then press SELECT.
2) Choose the LEvEL using
SPEED -/+, then press SELECT.
3) Choose WEIGHT using SPEED -/+, then press SELECT.
4) Press START.
To Next Page
Loading...
Need help?
General
