Matrix R7X-03 User Manual

37
9.2 HANDLEBAR REPLACEMENT
1) Remove the 2 screws holding on the handlebar cover (Figures A & B).
2) Remove the 4 screws holding the heart rate handlebar to the console mast being careful to support the handlebar (Figure C).
3) Remove the defective handlebar (Figure D).
4) Reverse Steps 1-3 to install a new handlebar.
FIGURE A
FIGURE B
FIGURE C FIGURE D
CHAPTER 9: PART REPLACEMENT GUIDE

Matrix R7X-03 Specifications

General

Brand	Matrix
Model	R7X-03
Category	Exercise Bike
Language	English