Matrix T5X-07 User Manual

49
note: The instructions below are for console overlays / keypads replacement, but the procedure is the same regardless of where the overlay /
keypad.
1) Turn off power and disconnect the cord from the machine.
2) Remove the console as outlined in Section 9.12.
3) Remove the back cover of the console (Figure A).
4) Unplug and remove the faulty overlay (Figure B).
5) Clean the console area with alcohol to remove any left over adhesive (Figure C).
6) Remove the protective film over the display window of the overlay (Figure D).
7) Peel part of the protective film from the back of the overlay (Figure E).
FIGURE A FIGURE B
9.19 OVERLAY REPLACEMENT
FIGURE C
FIGURE D
FIGURE E
CHAPTER 9: PART REPLACEMENT GUIDE

Matrix T5X-07 Specifications

General

Brand	Matrix
Model	T5X-07
Category	Treadmill
Language	English