Matrix T70 Service Manual

C HAPTER 3 : Part Replacement Guide
3.3 REAR ROLLER REPLACEMENT
1) Remove side rail in section 3.2
2) Remove rear roller
3) Replace new rear roller and tightness bolts ( Fig-1)
4) Revers e step 2 to step 1
Fig-1
1 bolt each side
Note
1. be s re to set the correct running belt tension after re placing the belt.
2. Over or under tension can result in damage or injury.
3. Always bring tension up evenly from the left to right tensioning bolts using small adjustments.
4.
Final steps of tensioning are when the running belt just stoops slip ping and slows the moto when trying
to stop the belt with you r feet using an abrupt stop at a walking speed.
5. Reference section 3.6 note 2 to adjust the running belt.
22

Matrix T70 Specifications

General

Brand	Matrix
Model	T70
Category	Treadmill
Language	English