Mattei BLADE 4 User Manual

0.00
TI013G0008
General information
- Symbols in the manual page 1.01
- Purpose of document page 1.02
- Required qualifi cations for operators page 1.03
- Manufacturer’s identifi cation data - “CE MARKING” page 1.04
- General notes on delivery – fi nal inspection – safety precautions page 1.04
- Settings to be made by customer page 1.08
- Instructions on how to request interventions - Instructions on how
to order spare parts page 1.08
General information - SAFETY
- Dangers, residual risks and general information page 2.01
- Responsibilities - Description of pictograms page 2.04
Description of Machine
- General description of machine page 3.01
- Technical data and overall dimensions page 3.04
Transportation and handling - Installation
- Position of compressor page 4.01
- Electrical connection - Connection to the air distribution system
- Dimensions of compressed air pipings page 4.02
Safety devices
- Drive and control switches page 5.01
Use of compressor
- Foreword - Operation modes page 6.01
- MAESTRO XB controller - Managing the compressor failures page 6.02
Maintenance
- Periodic checks page 7.01
- Check of oil level - Cleaning and/or replacing the air suction fi lter -
Cleaning the oil/air radiator - Cleaning the pre-fi lters -
Belt Tensioning page 7.02
- Belt Replacement - Replacement of Oil Filter Element -
Replacement of the Oil Extraction Filter Element - Eliminating the receiver
condensate
page 7.03
- Oil change page 7.03
Lubricants page 8.01
Troubleshooting page 9.01
The electric motor page 10.01
Storage – decommissioning and dismantling page 11.01
Condensate Unload in Optional Kit page 12.01
Attachments:
Form to request technical service
Form to request spare parts
Parts to be replaced during maintenance
“Technical data “ sheets
General Index

Mattei BLADE 4 Specifications

General

Brand	Mattei
Model	BLADE 4
Category	Air Compressor
Language	English