Mattei BLADE 4 User Manual

1.04
TI013G0008
General information
Manufacturer’s identifi cation data - “CE
MARKING”
Ing. ENEA MATTEI S.p.A. is identifi ed as the
machine’s manufacturer, according to current
laws in force, by following acts:
- Declaration of conformity - CE marking
- Instruction manual
A specifi c plate on the machine gives the
following indelible information on the CE
MARKING:
Model
S/N and year
Capacity
Pressure
Power
Voltage
Amps
The relevant “DECLARATION OF CONFOR-
MITY” is enclosed.
It is forbidden to remove the “CE MARKING”
plate and/or exchange it with other plates of
machines of the same model in use by the
customer or the operator.
Should the “CE MARKING” plate be acciden-
tally damaged or removed from the machine,
customer should inform the company.
General notes on delivery
Upon receipt of the machine please check
that:
The supply complies with the order
specifi cation.
There are no damages due to transportation
or other reasons.
(In the event of damage or missing parts,
please inform immediately and in detail the
forwarding agent or Ing. ENEA MATTEI
S.p.A.)
ALWAYS STATE THE MACHINE SERIAL
NUMBER AS WELL AS THE PRINT NUM-
BER OF THIS MANUAL WHEN MAKING
ANY REQUEST TO Mattei Compressors
Inc OR ONE OF THEIR SERVICE CEN-
TRES.
Final inspection
The manufacturer carries out the final
inspection of the machine directly, during
the production phases, in compliance with
the company quality system.
Ing. ENEA MATTEI S.p.A. is responsible for
the machine under its original confi guration.
Ing. ENEA MATTEI S.p.A. refuses any
responsibility for improper use of the
machine, for damages due to operations
which are not described in this manual or
unreasonable applications.
Safety precautions
The final user should comply with the
instructions given by the supplier, concerning:
• safety devices already installed on the
machine
• instructions for correct machine installation
• correct use and periodic maintenance
of all the machine components, including
safety devices
• regulations of current laws
The following safety precautions defi ne both
the behaviour and obligations to be observed
when carrying out the activities listed in the
manual, the instructions for the machine
use and how to operate it under safe
conditions, for the staff and the surrounding
environment.
Machinery Directive

Mattei BLADE 4 Specifications

General

Brand	Mattei
Model	BLADE 4
Category	Air Compressor
Language	English