might cause the phone to malfunction and might damage your
phone.
19 SAR INFORMATION
Information on impact of radio waves and the Specific Absorption
Rate (SAR).
The mobile telephone Maxcom MM237 is intended to meet all
safety requirements pertaining to impact of radio waves
recommended by international guidelines. These guidelines were
developed by the International Commission on Non-Ionizing
Radiation Protection (ICNIRP), an independent scientific
organization with a big safety margin to protect all people
regardless their age and health condition. In recommendations
pertaining to impact of radio waves, the term Specific Absorption
Rate (SAR) is used. As recommended by ICNIRP, the border
value of SAR is 2,0 watts per kilogram (W/kg), with the value
averaged over any 10g of tissue. SAR value is determined under
a device regular working conditions, at the maximum transmit
power and at maximum spectrum of frequencies. The actual SAR
value can be way below the maximum value since the device is
designed to operate at a minimum power level required to be
connected with network.
For this model, the maximum SAR value measured in tests at the
ear is 0,734 W/kg.
SAR values might vary depending on domestic reporting and
testing requirements and on radio frequency used by a given
network.
To Next Page
Loading...
Need help?
General
