Maxcom MM28D HS User Manual

17
This function should be supported by net operator
 Call transfer
1. In on-hook state, press MENU/OK key + 4 key to enter the Settings interface, the cursor
stops at Phone setup
2. Press UP↑ or DOWN↓ key to move the cursor to Call setup, press MENU/OK key to
confirm and enter the submenu of Call waiting ,Call divert, Speed dial, Auto call
3. Press UP↑ or DOWN↓ key to select Call divert
4. Press MENU/OK key to confirm and enter the submenu of All voice calls, If unreachable ,
If no answer, If busy, All data calls, Cancel all diverts, press UP or DOWN key to select
and do operations to the following :
1) All Voice Calls: All incoming calls will be diverted to another appointed phone. Press
MENU/OK key to get into it and continue to select it Activate or Deactivate( Do not divert
the calls) or Query status, if select Activate, use the digit keys to set the number you want
to divert to.
2) If unreachable: When there is no network or this phone is power off, all incoming calls will
be diverted to another appointed phone .The operations are the same as “All Voice Calls”.
3) If No Answer: When there is no answer, the incoming calls will be diverted to another
appointed phone. The operations are the same as “All Voice Calls”.
4) If busy: If this phone is on busy line, the incoming calls will be diverted to another
appointed phone. The operations are the same as “All Voice Calls”.
After activate this function, you can divert the incoming calls to another appointed phone
when you can not receive or do not want to receive them
Note: This function should be supported by net operator and not supported by some SIM card.
 Speed dial
1. In on-hook state, press MENU/OK key + 4 key to enter the Settings interface, the cursor
stops at Phone setup
2. Press UP↑ or DOWN↓ key to move the cursor to Call setup, press MENU/OK key to
confirm and enter the submenu of Call waiting ,Call divert, Speed dial, Auto call
3. Press UP↑ or DOWN↓ key to select Speed dial
4. Press MENU/OK key to confirm and enter the submenu with Enable speed dial, Set
number, press UP↑ or DOWN↓ key to select and do operations to the following:
1) Enable speed dial : select it to set the speed dial function to On or Off
2) Set number : Set the speed dialed number(Input the name and number using digit keys)on
location 2-9 . 8 groups of speed dialed number can be set in all.

Maxcom MM28D HS Specifications

General

Type	DECT telephone
Handset type	Wired handset
Answering machine	-
Elderly phone	Yes
Mounting type	Desk
Product color	Black
Phonebook capacity	300 entries
Display diagonal	2.8 \
Display resolution	128 x 64 pixels
Number of handsets included	1
Standby time	120 h
Battery capacity	600 mAh

Weight and Dimensions

Depth	161 mm
Width	191 mm
Height	69 mm
Weight	644 g