Maxcom MM28D HS User Manual

23
 Enter hold mode
During conversation, press MENU key, LCD display Hold, Press MENU key, LCD display H on
the LCD, the phone enter hold mode, the another part just can receive busy tone, and you can
not receive any tone.
 Exit hold mode
During conversation, press MENU key, LCD display Retrieve, press MENU key to confirm, LCD
display Retrieved, the phone enter normal state.
End
During conversation, press MENU key, LCD display Hold, press DOWN↓ key once to move the
cursor to End, press MENU key to confirm and end this call.
New call
It is able to make another call, during conversation.
Press MENU or OK key, LCD display Hold, press DOWN↓ key to move the cursor to New call,
Press MENU key to enter, then you can dial another call, when the second call enter
conversation state, press MENU key to enter submenus:
 Swap
Press MENU or OK key, LCD display Swap, press MENU or OK key to swap between two calls,
then another caller will enter hold mode and can receive busy tone only, and you can talk with
one line only. The current conversation number will be display on the LCD, another caller
number will be hided and there is H on the LCD.
 Conference
Press MENU key, LCD display Swap, press UP↑ or DOWN↓ to select Conference, press
MENU or OK key to enter three-way talk mode.
(Note: This function needs network service support.)
 Transfer
Press MENU key, LCD display Swap, press DOWN↓ key until to move the cursor to Transfer,
press MENU key to transfer current call function, but this function should be apply for your local
telecom company.
 End single call
Press MENU or OK key, LCD display Hold, press DOWN↓ key until to move the cursor to End
single call, press MENU key to end current conversation, another line still in the hold mode,
then press MENU or OK key, LCD display Retrieve single call, press MENU key to confirm,
LCD display Retrieved, the phone enter normal conversation state.
 End all
Press MENU or OK key, LCD display Swap, press DOWN↓ key until to move the cursor to End
all, press MENU key to end two calls together.

Maxcom MM28D HS Specifications

General

Type	DECT telephone
Handset type	Wired handset
Answering machine	-
Elderly phone	Yes
Mounting type	Desk
Product color	Black
Phonebook capacity	300 entries
Display diagonal	2.8 \
Display resolution	128 x 64 pixels
Number of handsets included	1
Standby time	120 h
Battery capacity	600 mAh

Weight and Dimensions

Depth	161 mm
Width	191 mm
Height	69 mm
Weight	644 g