Maxcom MM428 User Manual

24
you want to find a Contact with name starting with
the letter for example U, press the 8 key twice. If you
want to get connected with the selected Contact,
press the green receiver.
7.3 Dialing Number from Call Log
Press the green receiver in Idle mode (visible
desktop) to enter the Call Log. Use the UP/DOWN
keys to navigate up and down the Call Log. Press
the green receiver, to make a phone call.
7.4 Speed Dial (see 6.6.1)
If certain Contacts were previously assigned to the
keys 2-9,*,# in Idle mode (desktop) press and hold
the desired key to make a phone call. You can also
press the “heart” key.
8. Emergency Calls
If you have not assigned any emergency number,
pressing and holding the emergency key will get you
connected with the number 112.
You can set five emergency numbers. Pressing and
holding the emergency key (located under the
display) will make the Emergency Mode activated.
The phone will automatically activate the alarm,
send text messages, and call previously assigned
Emergency Contacts, one by one. Every emergency

Maxcom MM428 Specifications

General

Display diagonal	1.8 \
Display resolution	160 x 128 pixels
Flash card support	Yes
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	4 GB
WAP	-
Data network	GSM
SIM card capability	Dual SIM
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Talk time (2G)	5 h
Battery capacity	800 mAh
Standby time (2G)	240 h
Subscription type	No subscription
Type	Senior phone
Product color	Black, Red
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, SOS

Weight and Dimensions

Depth	13 mm
Width	54 mm
Height	116 mm
Weight	78 g