Black plate (189,1)
Select the proper headlight angle from the following
chart.
Front seat
Rear
seat
*1
Load
Switch
Position
Driver Passenger
× ―――0
×× ―― 0
×× ×― 1
×× ××2
× ――×3
×: Yes
―:No
*1 Second-row and third-row seats
q
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during dayti me
operation.
For that reason, the daytime running lights
automatically turn on when the ignition is
switched ON.
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
Turn and Lane-Change
Signals
Turn signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Left turn
Right lane change
Left lane change
OFF
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever halfway toward the
direction of the change ―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
NOTE
l
If an indicator light stays on without
flashing or if it flashes abnormally, one of
the turn signal bulbs may be burned out.
l
A personalized function is available to
change the turn indicator sound volume.
Refer to Personalization Features on page
10-8.
Driving Your Mazda
Switches and Controls
5-63
Mazda5_8DW3-EA-14H_Edition1 Page189
Tuesday, June 3 2014 12:34 AM
Form No.8DW3-EA-14H
To Next Page
Loading...
Need help?
General
