31
Packing Instructions
In the event it is necessary to repack the equipment for ship-
ment, the equipment must be packed exactly as shown be-
low.
It is very important that the four feet are attached to the
bottom of the equipment. This will ensure the proper equip-
ment location on the bottom foam pad. Failure to do this
will result in shipping damage. Also, to protect the finish of
the glass and metal surfaces it is advisable to place the
MC2KW Output Module and the MC2KW Power Modules
into the orginal protective cotton blue bag before placing
them into the shipping carton.
Note: Unless instructed otherwise, please return the
McIntosh Custom Interconnect Cables along with the
MC2KW Power Amplifier.
Use the original shipping carton and interior parts only if
they are all in good serviceable condition. If a shipping car-
Packing Instructions
Quantity Part Number Description
1 034104 Shipping carton bottom
1 034105 Shipping carton top
1 034356 Protective blue cloth cover
4 018445 Feet
3 034349 Foam ring
2 034349 Foam pad (top and bottom)
1 034341 Shipping carton for
interconnect cables
ton or any of the interior part(s) are needed, please call or
write Customer Service Department of McIntosh Labora-
tory. Please see the Part List for the correct part numbers.
Note: The McIntosh MC2KW Output Module and MC2HW
Power Module use the same shipping carton.
To Next Page
Loading...
Need help?
General
