17
How to use the Remote Control for Playback of Data CD Disc, Data DVD Disc and USB Flash Memory Data Drive
How to use the Remote Control for
Playback of Data CD Disc, Data DVD Disc
and USB Flash Memory Data Drive
The Remote Control is capable of performing most
Operating Functions for Data Disc and the USB Flash
Memory on the MCT500.
If at any time the Player seems unresponsive to the
desired Remote Control Command, it may be neces-
sary to select the color of the push-button nomencla-
ture for the desired command. This is accomplished
by first pressing the SHIFT Push-button to select gold,
as indicated by the LED, and then within 3 seconds
pressing (or in the case of some functions repeatedly
pressing) the desired command push-button.
Note: Refer to the “How to Operate” Section of this
manual for additional information using this
Remote Control.
Remote Control Button Functions
When playing a Data CD Disc, Data DVD Disc or
USB Flash Memory Drive, some of the Remote Con-
trol Push-buttons that are labeled for stand CD and
SACD Operation Functions will also perform different
additional Operation Functions.
Front Panel Display
When playing a Data CD Disc, Data DVD Disc or
USB Flash Memory Drive, the MCT500 Front Panel
Information Display will also indicate the following:
Folder or Sub-Folder Name
Artist Name
Album Name
Track Name
Audio Format Type and Sampling Frequency
Getting Ready-
Freddie King -
Music One
09-Tore Down.
WAV 44.1kHz
To Next Page
Loading...
Need help?
General
