IOMM AGR AGR 055A through 100A 3
Introduction
General Description
McQuay Air-Cooled Global water chillers are complete, self-contained automatic refrigerating units.
Every unit is completely assembled, factory wired, charged, and tested. Each unit consists of twin
Air-Cooled condensers with integral subcooler sections, two reciprocating compressors, replaceable
tube dual circuit shell-and-tube evaporator, and complete refrigerant piping. Liquid line
components include manual liquid line shutoff valves, sight-glass/moisture indicators, solenoid
valves, and double diaphragm hydraulic element thermal expansion valves. Other features include
compressor crankcase heaters, an evaporator heater for chilled water freeze protection, limited
recycling pumpdown during “on” or “off” periods, compressor lead-lag switch to alternate the
compressor starting sequence, and sequenced starting of compressors.
The electrical control center includes all safety and operating controls necessary for dependable
automatic operation. Condenser fan motors are fused in all three phases and started by their own
three-pole contactors. Compressors are not fused but may be protected by optional circuit breakers.
Inspection
Check all items carefully against the bill of lading. Inspect all units for damage upon arrival.
Report shipping damage and file a claim with the carrier. Check the unit name plate before
unloading, making certain it agrees with the power supply available. McQuay is not responsible for
physical damage after unit leaves the factory.
Note: Unit shipping and operating weights are available in the Physical Data tables
beginning on page 13.
To Next Page
Loading...
Need help?
General
