McQuay MCK User Manual

MCQUAY Service Guide Book Handset Operating Guide
10
4.5 GS01
Operation Guide
1. Transmission Source
2. Signal transmission indication
• Blink to confirm that the last setting has
been transmitted to the unit.
3. ON/OFF Button
4. Fan Speed selection
• Press the
button continuously will
toggle the fan speed.
5. Operation mode
• For cooling only unit: COOL
, DRY
and FAN
.
• For heat pump unit: AUTO
, COOL
, DRY , FAN and HEAT .
• The AUTO
mode is unavailable for
chilled water system.
6. Automatic air swing
• Press the SWING
button to activate
the automatic air swing function. Press
again to stop the louver at the desired
direction.
Swing mode selection (for CK-E model)
• Press SWING
button for 4 seconds to
enter field setting mode.
• While in field setting mode, it will only
show SWING MODE
.
• Press temperature button to select
SWING MODE
rotation from Swing
Mode 1 to Swing Mode 3.
• There are 3 different SWING MODE,
which are:
Mode 1 Mode 2 Mode 3
SWING MODE will not activate unless SWING is
activated.
• If no mode changes within 4 seconds, unit
will operate According to the selected
SWING MODE
.
7. Turbo function (model dependent)
• Press
for fast cooling or heating
operation.
• Fan speed turn to maximum speed for 15
minutes.
• Press again to deactivate the function.
• Available under HEAT, COOL and DRY
modes only.
1
2
3
4
5
6
7
8
9
10
11
12
13

McQuay MCK Specifications

General

Brand	McQuay
Model	MCK
Category	Air Conditioner
Language	English