100
Adaptive Damping System
(ADS)
Depending upon road surface
conditions, load, driving style, ADS
will automatically adjust the optimal
ride firmness.
The malfunction indicator lamp comes
on with the key in steering lock
position 2 and goes out when the
engine is running.
If the malfunction indicator lamp stays
on after the engine is running or comes
on while driving, then the system has
detected a malfunction.
We recommend that you visit an
authorized Mercedes-Benz dealer as
soon as possible to have the system
checked out.
Note:
If the power supply was interrupted
(battery disconnected or empty), the
malfunction indicator lamp will light
up when the engine is running.
Turn the steering wheel from full left to
full right lock position. The light
should go out.
Adaptive Damping System
Adjustment
The switch is located in the center
console.
1. Firm dampening program.
This setting should be used for
sporty driving.
During the setting for sporty
driving the indicator lamp in the
switch lights up.
2. Soft dampening program.
This setting should be used for
regular driving.
To Next Page
Loading...
Need help?
General
