354
Practical hints
What to do if …?
Lamps in instrument cluster General information:
If any of the following bulbs in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem Possible cause Suggested solution
- The yellow ABS malfunction indi-
cator lamp comes on while driv-
ing.
The ABS has detected a malfunction and has
switched off. The BAS and the ESP are also
switched off (see messages in display).
The brake system is still functioning normally
but without the ABS available.
왘 Continue driving with added caution.
Wheels will lock during hard braking,
reducing steering capability.
왘 Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
왘 Read and observe messages in the
display (
컄 page 363).
The charging voltage has fallen below
10 volts and the ABS has switched off.
When the voltage is above this value
again, the ABS is operational again.
왘 If necessary, have the generator (al-
ternator) and battery checked.
To Next Page
Loading...
Need help?
General
