428
Practical hints
Battery
2 Negative terminal
3 Positive terminal cover
Disconnecting the battery
왘 Turn off the engine (컄 page 56).
왘 Turn off all electrical consumers.
왘 Remove SmartKey from starter switch.
Vehicles with KEYLESS-GO*:
왘 Press the start/stop button until
the engine shuts off.
왘 Open the driver’s door.
왘 Open the hood (컄 page 305).
왘 Remove the filter box (컄 page 427).
왘 Read and observe safety instructions
and precautions (
컄 page 427).
왘 Disconnect the battery negative lead
from negative terminal 2.
왘 Remove cover 3 from the positive ter-
minal.
왘 Disconnect the battery positive lead.
Removing the battery
왘 Remove the screw securing the
battery.
왘 Remove the battery support and
bracket.
왘 Take out the battery.
Charging and reinstalling battery
왘 Charge battery in accordance with the
instructions of the battery charger
manufacturer.
왘 Reinstall the charged battery. Follow
the previously described steps in
reverse order.
Warning! G
With a disconnected battery
ì•« you will no longer be able to turn the
SmartKey in the starter switch and
pressing the KEYLESS-GO* start/stop
button on the gear selector lever will
have no effect
ì•« the gear selector lever will remain
locked in position
P
To Next Page
Need help?
General
