57
Getting started
Parking and locking
ì™” Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows:
Parking brake
1 Release handle
2 Parking brake pedal
왘 Step firmly on parking brake pedal 2.
When the engine is running, the
warning lamp ; (USA only)
or 3 (Canada only) in the instru-
ment cluster will be illuminated.
Warning! G
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
Warning! G
To reduce the risk of personal injury as a re-
sult of inadvertent vehicle movement, be-
fore turning off the engine and leaving the
vehicle always:
ì•« Keep right foot on brake pedal.
ì•« Firmly depress parking brake pedal.
ì•« Move the gear selector lever to
position P.
ì•« Slowly release brake pedal.
ì•« When parked on an incline, turn front
wheel towards the road curb.
ì•« Turn the SmartKey to starter switch
position 0 and remove, or press
start/stop button (vehicles with
KEYLESS-GO*).
ì•« Take the SmartKey or the SmartKey with
KEYLESS-GO* and lock vehicle when
leaving.
To Next Page
Loading...
Need help?
General
