147
Controls in detail
Lighting
Manual headlamp mode
The low beam headlamps and the parking
lamps can be switched on and off with the
exterior lamp switch.
왘 Turn the exterior lamp switch to
position B.
Automatic headlamp mode
The following lamps switch on and off
automatically depending on the brightness
of the ambient light:
ì•« Low beam headlamps
ì•« Tail and parking lamps
ì•« License plate lamps
ì•« Side marker lamps
왘 Turn the exterior lamp switch to
position U.
With the SmartKey in starter switch
position 1 or the KEYLESS-GO*
start/stop button pressed once, only
the parking lamps and the side marker
lamps will switch on and off automati-
cally.
When the engine is running, the low
beam headlamps, the tail and parking
lamps, the license plate lamps, and the
side marker lamps will switch on and
off automatically.
Warning! G
If the exterior lamp switch is set to U,
ì•« the headlamps may switch off
unexpectedly when the system senses
bright ambient light, for example light
from oncoming traffic
ì•« the headlamps will not be automatically
switched on under foggy conditions
To minimize risk to you and to others,
activate headlamps by turning exterior lamp
switch to B when driving or when traffic
and/or ambient lighting conditions require
you to do so.
In low ambient lighting conditions, only
switch from position U to B with the
vehicle at a standstill in a safe location.
Switching from U to B will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions
may result in an accident.
The automatic headlamp feature is only an
aid to the driver. The driver is responsible for
the operation of the vehicle’s lights at all
times.
To Next Page
Loading...
Need help?
General
