159
Controls in detail
Control system
왔 Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1 (
컄 page 40) or as
soon as the KEYLESS-GO start/stop
button* is in position 1 (
컄 page 41). The
control system enables you to
앫 call up information about your vehicle
앫 change vehicle settings
For example, you can use the control
system to find out when your vehicle is
next due for maintenance service, to set
the language for messages in the instru-
ment cluster display, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1 Trip odometer
2 Main odometer
3 Transmission position indicator
4 Current transmission program mode
5 Status indicator (outside temperature
or digital speedometer)
For more information on menus displayed
in the multifunction display, see “Menus”
(
컄 page 162).
i
The displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning! G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just
30 mph (approximately 50 km/h), your
vehicle is covering a distance of
44 feet (approximately 14 m) every second.
To Next Page
Loading...
Need help?
General
