263
Controls in detail
Panorama roof with power tilt/sliding panel*
Roof panel switch
1 Push back to slide roof panel open
2 Push forward to slide roof panel closed
3 Push up to raise roof panel
4 Pull down to lower roof panel
Opening
왘 Pull and hold the roof panel switch to
resistance point in direction of
arrow 1 (
컄 page 263).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Closing
왘 Press and hold the roof panel switch in
direction of arrow 2 (
컄 page 263).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Raising
You can raise the tilt/sliding panel at the
rear for better ventilation of the vehicle
interior.
왘 Press and hold the roof panel switch in
direction of arrow 3 (
컄 page 263).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Lowering
왘 Pull and hold the roof panel switch in
direction of arrow 4 (
컄 page 263)
until the tilt/sliding panel has lowered
and closed completely.
Fully opening (Express-open) the
panorama roof with tilt/sliding panel
왘 Pull the roof panel switch past the
resistance point in direction of
arrow 1 (
컄 page 263) and release.
The tilt/sliding panel opens com-
pletely.
Stopping the panorama roof with
tilt/sliding panel during Express-open
왘 Move the roof panel switch in any
direction.
The tilt/sliding panel will stop in its
current position.
To Next Page
Loading...
Need help?
General
