243
Controls in detail
Power tilt/sliding sunroof
왘 Switch off the ignition (컄 page 40).
왘 Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
왘 Switch off the ignition (컄 page 41).
왘 Open the driver’s door (this puts
the starter switch in position 0,
same as with the SmartKey
removed from the starter switch).
The driver’s door then can be
closed again.
왘 Remove the fuse for the tilt/sliding
sunroof from the fuse box
(
컄 page 504).
왘 Reinsert the fuse in the main box.
왘 Switch on the ignition (컄 page 40).
왘 Press and hold the sunroof switch in
the direction of arrow 3 (
컄 page 241)
until the tilt/sliding sunroof is fully
raised at the rear.
왘 Hold the sunroof switch in the direction
of arrow 3 for approximately
1 second.
왘 Open the tilt/sliding sunroof using the
Express-open feature (
컄 page 242).
If the tilt/sliding sunroof opens
completely, it is synchronized.
If the tilt/sliding sunroof does not open
completely:
왘 Repeat the above steps.
i
For information on which fuse box contains
the fuse for the power tilt/sliding sunroof, see
the fuse chart provided with the vehicle tool kit
(
컄 page 448).