471
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the exterior lamp switch to
position M (
컄 page 135).
Tail lamp unit
왘 Open the tailgate (컄 page 119).
Opening the side trim panels
Opening the driver’s side trim panel:
1 Cover in left side trim panel
2 Lock
왘 Turn lock 1 90° in direction of arrow.
왘 Fold down cover 2.
Vehicles without sound system*:
왘 Remove the storage compartment on
the driver’s side.
1 Lock
2 Storage compartment
왘 Insert a suitable object such as a coin
into the slot of lock 1.
왘 Turn lock 1 counterclockwise by 90°.
왘 Remove storage compartment 2.
i
To access the bulb socket, you have to
remove the cover in the corresponding side trim
panel of the cargo compartment.
To Next Page
Loading...
Need help?
General
