Selecting the drive program
X
Push DYNAMIC SELECT switch : forwards
or back until the desired drive program is
selected.
The status icon of the selected drive program
is shown in the multifunction display.
In addition, the current drive program settings
are displayed briefly in the multimedia system
display.
You can also change gear yourself using the
steering wheel paddle shifters. For further infor-
mation on the manual drive program
(
Y page 152).
Additional settings
:
Position of the exhaust flap (Y page 142)
;
ECO start/stop function (Y page 140)
=
ESP
®
(Y page 69)
?
Suspension (Y page 183)
A
Permanently activates manual gearshifting
(
Y page 152)
When you press buttons : - A the corre-
sponding setting is selected. The DYNAMIC
SELECT switch setting is overwritten.
If you switch to drive program I, all stored char-
acteristics will be accepted. This is also the case
if you have previously pressed one of buttons :
- A.
i
Mercedes-AMG C 43 4MATIC In a few
countries, the ECO start/stop function is
deactivated at the factory due to the fuel
grade available. In this case, the ECO start/
stop function is not available in any drive pro-
gram, regardless of the display in the multi-
media system display.
All other models
Hybrid vehicles: be sure to observe the notes
in the supplement. Otherwise, you may not rec-
ognize dangers.
Use the DYNAMIC SELECT switch to change the
drive program.
Depending on the drive program selected the
following vehicle characteristics will change:
R
the drive (engine and transmission manage-
ment)
R
the suspension
R
the steering
R
the ECO start/stop function
R
the climate control:
-
the climate control settings
-
the rear window defroster operation period
-
the performance of the seat heating
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information about starting
the engine, see (
Y page 138).
X
Push DYNAMIC SELECT switch : forward or
back until the desired drive program is selec-
ted.
The status icon of the selected drive program
is shown in the multifunction display.
DYNAMIC SELECT switch
145
Driving and parking
Z
To Next Page
Loading...
Need help?
General
