#
To activate: press and hold button 2 for
approximately five seconds until an acoustic
signal sounds.
#
To deactivate: press and hold button 1 for
approximately five seconds until an acoustic
signal sounds.
In the following situations, there is a danger of
being locked out when the function is activated:
R
While the vehicle is being tow started/
pushed.
R
If the vehicle is being tested on a roller dyna‐
mometer.
Locking/unlocking the driver's door with the
emergency key
%
If you wish to lock the vehicle entirely using
the emergency key, first press the button for
locking from the inside while the driver's
door is open. Then proceed to lock the driv‐
er's door using the emergency key.
#
Remove the emergency key (/ page 65).
#
Insert the emergency key as far as it will go
into opening 1 in the cover.
#
Pull and hold the door handle.
#
Pull the cover on the emergency key as
straight as possible away from the vehicle
until it releases.
#
Release the door handle.
Opening and closing
69
To Next Page
Loading...
Need help?
General
